SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
4. Service
In this sub-menu the following items are viewed:
•
Date & Time
•
50 hours service interval
•
100 hours service interval
•
200 hours service interval
300 hours service interval
•
•
600 hours service interval
•
Serial no.
•
Total engine hours
Total threshing hours
•
•
Total hectares
•
Date & Time
To change Date and Time settings, proceed as
follows:
1. Select the item "Date & Time".
2. Press "enter".
3. Pop-up screen 1 appears on the screen.
4. Use the "up" and/or "down" navigation keys to
select the item to change.
5. Use the "+" and/or "–" keys to change the setting.
6. Press "enter" to confirm your choice. The next
item will become highlighted.
NOTE: If you change item "Running" to "Idle", then
the clock stops running.
NOTE: It is also possible to change the "Date & Time"
settings in the Road, Main or Custom info screen if
this item is selected for those screens.
2–166
313
314
315
316