New Holland CX720 Operator's Manual page 137

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
A drop down list will appear displaying the farm
names arranged in order they were created.
The first selection will always be "New..." (Assuming
the maximum number of Farms has not been
reached). Using the up and down arrow keys,
navigate to the desired farm.
Pressing the "enter" key selects the desired farm as
the active farm and returns to the farm selector
screen.
To create a new farm, highlight the "New..." then
press "enter".
A pop-up window is displayed with the automated
system generated farm name.
Use the keypad to edit the name
(12 characters maximum).
Pressing the "enter" key will save the name.
Pressing "ESC" will abort the edit process and return
to the select active farm drop down list without
creating a new farm.
The operator will not be allowed to create a new farm
if the maximum number of Farms is reached. The
"New..." selection will not be displayed. To regain the
ability to create new farms when the maximum
number has been reached, the data must be archived
to the desktop computer using the Precision Farming
Software. After the card data is archived, the .cnh file
on the card must be deleted using Windows Explorer.
NOTE: All data will be lost if the card is not archived
before deleting the .cnh file.
To use previously created Farm and Field names
after clearing a card, they will have to be exported
from the desktop computer to the card. This is
accomplished using the Device Setup Utility as
described in the Precision Farming Software
documentation.
2–64
96
97