New Holland CX720 Operator's Manual page 160

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION
4. To display only the crops the combine will be used
to harvest, select "Select crops to show" and
press "enter".
5. The pop-up screen will list all 16 factory defined
crops. Use the "up" and "down" navigation
buttons to navigate through the list.
Use the "left" navigate button to select or deselect
a crop. Once the desired crop is selected, press
the "enter" key. The selected crop will be
displayed on the Automatic Crop Setting and
Harvest info screens.
The different crops that can be selected are:
1. Soybeans
2. Corn
3. Wheat
4. Oats
5. Rye
6. Barley
7. Sorghum
8. Popcorn
9. Edible Beans
10. Corn 2
11. Canola
12. Rice
13. Sunflowers
14. Corn 3
15. Corn 4
16. Peas
Each crop has its own settings which are used to
calculate the "dry" weight and the "volume".
("volume"= only when US units are selected)
These settings are initially set at the factory and are
mentioned in a table (see further).
These setting can be changed. Proceed as follows:
1. Select the crop of which the setting are to be
changed and press "Enter".
2. Pop up screen 1 appears.
3. Select "Characteristics ..." and press "enter".
140
141
142
2–87