Feeding/Straw Elevator; Lower Shaft Adjustment - New Holland CX720 Operator's Manual

FEEDING/STRAW ELEVATOR

Lower shaft adjustment

The straw elevator bottom shaft 1 is spring-tensioned
so that it can float according to the amount of material
being handled.
The spring tension 2 must be adjusted according to
the crop being harvested.
• Models with front face adjustment.
For all crops other than maize:
1. Adjust special nut 3 on both sides until distance
"X" measures 90 – 93 mm (3 1/2'' – 3 21/32'').
2. If necessary, adjust spring 4 to a length of
111 – 113 mm (4 3/8'' – 4 1/2'').
For maize crops:
1. Adjust special nut 3 on both sides until distance
"X" measures 112 – 114 mm (4 13/32'' – 4 1/2'').
2. If necessary, adjust spring 4 to a length of
88 – 90 mm (3 15/32'' – 3 1/2'').
NOTE: For sunflowers with big heads is it
recommended to adjust the lower shaft in maize
position.
SECTION 3 – FIELD AND SITE OPERATION
28
29
3–33