Marker Setup - New Holland CX720 Operator's Manual

SECTION 2 – CONTROLS, INSTRUMENTS AND OPERATION

4. Marker setup

This sub-menu is only available when a data card is
installed.
When creating a yield map of the field being
harvested, markers can be set to identify the places
in the field with stones, lodged crop, ...
Up to six different types of markers (e.g. weed,
stones, other variety,...) can be used while creating a
yield map. There are 12 total marker names
available, any one of which can be assigned to the six
markers numbers on the display.
The actual assignment is displayed next to each
number. The assignment of markers to the numbers
can be changed.
To change the assignment of markers to the
numbers, proceed as follows:
1. Navigate to the marker setup screen, then press
the "right" navigation key.
2. Select the number to be changed using the "up"
or "down" navigation keys.
3. Press "enter".
4. Pop-up screen (1) appears showing the different
markers available.
5. Select the desired type of marker with the "up" or
"down" navigation key.
6. Press "enter" to assign the selected marker to the
number.
2–68
104
105
106