UNLOADING TUBE GEARBOX
Oil check
The unloading tube gearbox oil level should only be
checked.
•
After the first 100 operating hours.
•
Thereafter, every 600 operating hours or
annually.
To check the oil proceed as follows:
1. Place the unloading tube in transport position.
2. Loosen the two nuts to remove cover 1.
3. Remove the filler plug 2 of the gearbox.
Oil capacity
0.3 litres (0.08 US gal)
Oil specification
Use AMBRA HYPOIDE 90, SAE 80W90, NH520A or
an oil meeting the following specification:
•
API GL-5
•
MIL-L-2105 D
SECTION 4 – LUBRICATION AND MAINTENANCE
112
113
4–45