New Holland CX720 Operator's Manual page 434

THRESHING
Anti-dust plate
Remove the anti-dust plate 2 and antiwrap shields 3
in maize/ sunflowers.
To remove the anti-dust plate, proceed as follows:
1. Unscrew bolts 1 and remove plate 2 to which
anti-dust plate is fitted.
2. Unscrew two bolts 4.
3. Pull out rod 5 to remove anti-dust plate 6.
4. Reinstall plate 2.
NOTE: To reinstall the anti-dust plate, proceed in
reverse order of the removal sequence and adjust
nuts 7 until there is a clearance of 1 – 5 mm
(5/128'' – 3/16'') between the plate and the nearest
drum rasp bar on nearest position.
SECTION 4 – LUBRICATION AND MAINTENANCE
166
167
4–69