Safety During Operation - New Holland SD440 Repair Manual

Table of Contents

Advertisement

SECTION 1 - GENERAL INFORMATION

SAFETY DURING OPERATION

DO NOT ALLOW ANYONE ON THE AIR DRILL while
operating the air drill hydraulics.
NEVER disconnect the tractor from the air drill while the
air drill wings are raised.
KEEP CHILDREN AWAY from the air drill during
operation.
NEVER STAND within the radius of the raised wings.
Hydraulic or mechanical failure may result in rapid or
uncontrolled falling of the wings.
RAISE AND LOWER the wings only on level ground
with the depth control fully raised.
097002S
PARK ON LEVEL GROUND and block adequately
before servicing.
AVOID moving machines.
DO NOT sit or ride on moving implements. Death or
injury may result.
098001M1
DISENGAGE POWER AND SHUT DOWN the tractor
engine (remove the key from the tractor ignition), be
certain that all moving parts have stopped, and all pressure
in the system is relieved BEFORE cleaning, adjusting or
lubricating the air drill.
192169C
page 1-7

Advertisement

Table of Contents
loading

Table of Contents