SECTION 1 – GENERAL INFORMATION AND SAFETY
TIE DOWNS FOR SHIPPING
To hook-up the combine (e.g. trailer) proceed as
follows:
Install the combine on a trailer and support the front
and rear axle with wooden blocks as wide and as low
as possible.
•
At the front:
There are two holes foreseen at the left-hand and
right-hand straw elevator lift cylinder support.
Hook-up with a rope or a chain in cross-bond.
Extra hooks are foreseen (if installed).
•
At the rear:
Use hooks (1) to tie down the combine.
60
61
62
1–49