Language Selection After Switching On The Pump For The First Time - Ecolab EcoAdd Series Operating Instructions Manual

7.10.3.1 Language selection after switching on the pump for the first time:

The 'EcoAdd' is set to display a language selection screen the first time it
is switched on to ensure that the operating language is suitable for the on-
site operating personnel.
The language selection screen is displayed in English because this makes
it easiest to select from the languages available and English is widely
understood.
Fig. 47: Language selection after starting the pump 'EcoAdd'
Language selection after switching on the pump for the first time:
1.
'Press the ON/OFF button'
ð The pump switches on.
The 'language selection page' is displayed.
2. Select the required system language.
ð The option field to the left of the selected language is filled.
3.
Press the button
ð The selected language is saved and the pump switches off automatically. After an
automatic restart of the pump, the info screen (pos. 4) with all parameters is
displayed. The pump is then ready for operation and switches to the 'operation'
(pos. 5).
3
1
2
on the pump.
Next.
95
Control / Software
4 5
417102276 Rev. 5-02.2020