Container Size - Ecolab EcoAdd Series Operating Instructions Manual

Control / Software

7.10.13 Container size

The fill volume of the container is given under container size. As soon as a value for the
container size is set here, a "canister"Fig. 69(, pos. B) appears on the operating
screenFig. 69instead of the empty message symbol (, pos. A).
A calculated fill level is displayed here symbolically based on last container change.
If a Bluetooth PCB is installed in the pump, this feature cannot be used!
Fig. 69: 7-53d
Factory setting: No setting
[Container size] - setting:
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Use the scrollbar to scroll to the [menu item Container size] .
4. [Select Container size] .
ð Screen change for the setting: [Container size]
5. Enter the quantity in litres (before the decimal point) using the scrollbar.
6. Select the quantity in millilitres after the decimal point.
7. Enter the millimetres with the scrollbar.
8.
Press the
ð The setting is saved, and the screen switches back to the configuration overview.
9. By pressing the
10. By pressing the
ð The canister symbol (Fig. 69, pos. B) is displayed as a new fill level symbol.
417102276 Rev. 5-02.2020
4
3
A
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
button.
button, you can return to the [main menu].
button, you can return to the [operating display].
118
5
8
6
7
B