Batch] - [No Batch Metering] - Ecolab EcoAdd Series Operating Instructions Manual

[Select Batch] :
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Use the scrollbar to scroll to the [menu item Batch] .
4. [Select Batch] .
5. Select the required charge:
The following charges can be set:
Ä Chapter 7.10.12.1 '[Batch] - [No batch metering]' on page 115
n
n Ä Chapter 7.10.12.2 '[Batch] - [Initial preparation]' on page 116
Ä Chapter 7.10.12.3 '[Batch] - [Initial concentration]' on page 117
n
6. Press the
7.
By pressing the
8.
By pressing the

7.10.12.1 [Batch] - [No batch metering]

4
Fig. 66: Batch - [No batch metering]
1. [Call up the Main menu] :
2. [Select Configuration] :
3. Use the scrollbar to scroll to the [menu item Batch] .
4. [Select Batch] .
ð Screen switches to the selection level [Batch]
5. [Select No batch metering] .
ð The option field 'No batch metering' is marked.
6. Press the
7.
By pressing the
8.
By pressing the
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
button to return to the menu: [Select Configuration].
button, you can return to the [main menu].
button, you can return to the [operating display].
3
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
button to return to the menu: [Configuration].
button, you can return to the [main menu].
button, you can return to the [operating display].
115
Control / Software
6
5
417102276 Rev. 5-02.2020