Ecolab EcoAdd Series Operating Instructions Manual page 228

Security
WARNING!
The protective earth connection is marked by this symbol at the connection
points.
DANGER!
Risk of fatal injury from electric current!
Contact with live, current-conducting components presents imminent, life-
threatening hazard. Damage to the insulation or individual components can
be life-threatening.
– Work on electrical components may only be carried out by professional
electricians.
– Before starting work, isolate the system from the power supply and
ensure this state is maintained for the duration of the work.
– Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
– Never bridge or decommission fuses.
– When replacing fuses, comply with the rating.
– Keep voltage-carrying parts away from moisture, as this can cause a
short circuit.
Risk of fire
DANGER!
Risk of fire
If there is a risk of fire, it is imperative to use the designated extinguishing
agent and to implement suitable safety measures to tackle the fire.
It is also imperative here to comply with the safety data sheet for the
chemicals you use to tackle the fire!
Risk of slipping
DANGER!
Slipping hazards are marked by the symbol opposite.
Spilled chemicals create a risk of slipping when wet.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused
by leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
417102276 Rev. 5-02.2020 26