Incorrect [Access Code]; What Can I Do If I Forget The Access Code - Ecolab EcoAdd Series Operating Instructions Manual

7.10.4.1 Incorrect [access code]

The activated [access code] is indicated by a closed padlock symbol
display.
1
Fig. 50: Incorrect password input
1. When attempting to call up the [Main menu] :
on page 73 with the closed lock symbol, the [access code] query is started
2.
Pressing the
ð Screen changes back to the operating screen.
3. After entering the [access code] click [Next]
ð If the [access code] is incorrect, the screen changes: 'Incorrect access code!'
If the password is correct, the screen changes back to the operating screen
4. Select the
ð The screen 'Incorrect access code!' is closed and a new query appears after the
correct [access code]. This process can be repeated any number of times, or
cancelled as described under pos. 2.

7.10.4.2 What can I do if I forget the access code?

What to do if you forget the access code
Reset the password:
If you forget the access code, you can contact Ecolab Service to request
an access code with which to "unlock" the pump and set a new code.
IMPORTANT:
– When you contact Ecolab, ensure that you have the pump production
code (see type plate) to hand and note down the current date displayed
on the pump (at the lower right of the display).
– The code provided by Ecolab is valid only for 24 hours.
This means that you must enter the code on the day it is provided by
Ecolab. The pump will accept the code only on this date.
button results in exiting the input for the [access code].
button.
99
Control / Software
2
3
Ä Chapter 7.7 'Main menu'
to save the setting.
417102276 Rev. 5-02.2020
on the operating
4