Operating Mode] [Timer] [Set Interval Programme] - Ecolab EcoAdd Series Operating Instructions Manual

7.9.5.2 [Operating mode] [Timer] [Set Interval programme] .

2
10
16
Fig. 43: Operating mode: [Timer] [Interval programme]
1. [Call up the Main menu] :
2. [Timer] [Select Interval programme] .
3.
[Click Next]
ð Screen change to the selection of the timer interval (interval programme)
4. [Select Interval programme] .
ð Screen change for the setting: 'Interval programme' - 'Switch-on duration'
5. Use the scrollbar to set the time / hours.
6. Select time / minutes.
7. Use the scrollbar to set the time / minutes.
8. Press the button
ð Screen change for the setting: 'Switch-off duration'
9. Use the scrollbar to set the minutes.
10. Select seconds.
11. Use the scrollbar to set the seconds.
12. Press the button
ð Screen change for the setting: 'Start state'
13. If required, 'Select OFF' .
14. Press the button
ð Screen change for the setting: 'Capacity'
15. Set the litres with the scrollbar.
16. Select the ml range.
17. Set ml using the scrollbar.
18. Press the
mode' .
19. By pressing the
20. By pressing the
5
3
4
13
11
12
19
17
18
Ä Chapter 7.7 'Main menu' on page 73
to save the setting.
Next.
Next.
Next.
button to save the settings and return to the selection: 'Operating
button, you can return to the 'main menu' .
button, you can return to the [operating display].
91
Control / Software
6 8
15
14
417102276 Rev. 5-02.2020
9
7