Metering Mode] [V-Variable] - Ecolab EcoAdd Series Operating Instructions Manual

7.8.1

[Metering mode] [V-variable]

Fig. 29: Metering mode: "V-variable"
[Metering mode] - [V-variable] - setting:
1.
[Call up the main menu] by pressing the [Menu button]
Ä Chapter 7.7 'Main menu' on page 73.
2. [select Configuration] :
3. [select Metering mode] .
ð Screen switches to [Metering mode].
4. [Select Metering mode] - [V-variable] .
5.
[ Click Next]
ð The screen switches to the setting for 'Capacity in L' .
6. 'Set the Capacity in L' in the place before the decimal point using the scrollbar.
7. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
8. 'Set the Capacity in L' in the place after the decimal point using the scrollbar.
9.
Pressing the
ð The screen switches to the overview for the [Metering mode].
10. Press the
11. Press the
ð The screen switches back to the [operating display] .
5
4
Ä Chapter 7.10 'Overview - Configuration' on page 92
to save the setting.
button saves the setting.
button again to return to the [Main menu].
button.
6
77
Control / Software
9
7
8
:
417102276 Rev. 5-02.2020