Symbols In Operating Mode - Ecolab EcoAdd Series Operating Instructions Manual

Dynamic pump
Table of Contents

Advertisement

Available languages

Available languages

Control / Software
7.4.1

Symbols in operating mode

Symbol
Description
Metering mode and signal to indicate that the pump is running
With every stroke of the pump, the display background flashes in the top right.
The letter shown represents the metering mode that is currently selected:
Ä Chapter 7.4 'Display view during ongoing operation (example)' on page 69
"External Lock" with orange background:
Indication that the pump has been locked by an external signal:
Level signal - Level pre-warning - Low level:
Flashing display with an orange background = Level pre-warning
Level signal - Empty signal - Chemical container empty:
Red display permanently shown = Empty signal
Level indicator - container setting: Canister
In the [Configuration menu] the [Container size] is set. This displays a canister instead of the
empty alarm symbol, representing the determined fill level graphically.
Service info with orange background
Forthcoming service indicating the number of weeks until the service is due.
Service info with a red background
Overdue service indicating the number of overdue weeks.
Timer - [access code] 'Administrator (A)'
Elapsing timer for the short-term cancellation of a code lock as 'Administrator (A)' (5 min.)
Timer - [access code] 'Operator (O)'
Elapsing timer for the short-term cancellation of a code lock as 'Operator (O)' (5 min.)
Timer - [access code]
If only 1 code has been entered, no code appears underneath the elapsing timer.
Metering lock enabled
With the metering lock activated, the pump only runs when an external enable contact is
closed. The operating mode does not affect the use of the metering lock.
Bluetooth connection
Bluetooth connection available to a smartphone.
[access code]
Display [access code] for restricted menu functions. To secure against adjustment of the pump
settings, an [access code] can be switched on
Lock open
Metering release
Metering release is activated.
Calibration
Notice to perform a calibration of the pump!
417102276 Rev. 5-02.2020
= standard,
= medium;
= [access code] inactive. Lock closed
= low,
= variable
Ä Chapter 7.10.4 'Access code' on page 97.
= [access code] active.
70

Advertisement

Table of Contents
loading

Table of Contents