Acknowledge Manually - Ecolab EcoAdd Series Operating Instructions Manual

7.10.8.2 Acknowledge manually:

The pump switches to Pause on empty signal and the empty signal symbol is displayed in
red . After pressing the red empty signal symbol, the container change must first be
approved on the screen and the suction pipe can then be moved to a new container.
Fig. 57: Acknowledge manually
[Acknowledge automatically] - setting:
1. [Call up the Main menu] :
2. [Configuration] - setting:
3. Use the scrollbar to scroll to the [Empty signal] .
4. [Select Empty signal] .
5. If required, select 'Empty signal contact' : 'Closed contact = Empty signal' .
ð After selecting this, a check mark
6. [ Click Next]
ð Screen changes to the acknowledgement query of the 'empty signal' .
7. [Select Acknowledge manually] .
8.
Pressing the
ð The screen switches to the overview: [Configuration].
9. By pressing the
10. By pressing the
3
5
4
Ä Chapter 7.7 'Main menu' on page 73
Ä Chapter 7.10 'Overview - Configuration' on page 92
to save the setting.
button saves the setting.
button, you can return to the [main menu].
button, you can return to the [operating display].
105
Control / Software
6
is set in the selection field.
417102276 Rev. 5-02.2020
8
7