Warranty; Contacts; Manufacturer's Service And Contact Address; Technical Support Contact - Ecolab EcoAdd Series Operating Instructions Manual

General information
1.7

Warranty

The manufacturer provides a warranty for operational safety, reliability and
performance under the following conditions only:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of the User Manual and all the
provided documents.
n Our products are used in accordance with the instructions in the User Manual.
Only OE spare parts must be used for repairs.
n
Our products are built, tested and CE certified in accordance with current
standards/guidelines. They left the factory in a safe, faultless condition.
To keep the equipment in this condition and to ensure risk-free operation,
the user must observe the instructions/warnings, maintenance regulations,
etc. contained in these operating instructions and, if applicable, affixed to
the product.
The general warranty and service conditions of the manufacturer also
apply.
1.8

Contacts

1.8.1

Manufacturer's service and contact address

Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
Email: engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
1.8.2

Technical support contact

If you contact technical support, make sure to include the type code in the
e-mail. The type code is the only way to identify the metering station and its
documentation. You can find the type code on the rating plate.
ECOLAB Engineering GmbH
Raiffeisenstraße 7
83313 Siegsdorf, Germany
Tel: +49 8662 61234
E-mail: eursiefb-technicalservice@ecolab.com
417102276 Rev. 5-02.2020 16