Packaging - Ecolab EcoAdd Series Operating Instructions Manual

General information
CAUTION!
Before returning devices and system components, they must be
completely cleaned of chemicals inside and outside!
Product-carrying lines and components must be flushed with sufficient
water to prevent the risk of injury to the personnel from chemical products.
The return must be requested "online":
https://www.ecolab-engineering.de/de/kontakt/ruecksendung.html.
Fill in all the details and follow the navigation.
The following documents must be completed:
– Returns form
– Request the form from Ecolab.
– Fill out the form correctly and in full.
– Fill out the clearance form.
– Send both in advance by fax: (+49 8662 61-258)
– System components:
– Free of all impurities (rinsed).
– In plastic packaging in cardboard to avoid leaks in the rinsing water.
– Cartons:
– Addressed to
– The word "REPAIR" must be written on a sticker or in clear
– Attach a return form.
1.4

Packaging

The individual packages are packaged according to the expected transport conditions.
Only environment-friendly materials were used for the packaging. The packaging is
designed to protect the individual components up to assembly against shipping damage,
corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Packaging materials are valuable raw materials and can, in many cases, be
used again or be usefully processed and recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
417102276 Rev. 5-02.2020
Ä Chapter 1.8.2 'Technical support contact' on page 16.
handwriting.
14