Servicing - Ecolab EcoAdd Series Operating Instructions Manual

Servicing

11 Servicing
Personnel:
Protective equipment:
DANGER!
Personal protective equipment, hereinafter referred to as PPE, is used to
protect personnel. It is imperative to pay attention to the PPE described in
the product data sheet (safety data sheet) for the metered medium.
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
If maintenance is due, this is shown on the pump display. For further info,
see
Ä Chapter 9.5 'Confirm the pump service' on page 145.
CAUTION!
Info for authorised service personnel of the firm Ecolab
An additional service manual is available, which can be requested from the
manufacturer or downloaded via the existing login at
www.ecolab-engineering.com if the manufacturer is suitably qualified or
authorised to do so.
The consumables and spare parts belonging to the pump type can be
identified on the basis of the pump key.
The pump key (
available on the type plate (
plate' on page 181) of the pump and is also additionally displayed on the
'INFO' screen (
Before servicing is carried out, the pump-specific consumables and spare
parts (
be stocked up.
For all queries to the manufacturer, it is important that the designation
and the pump type are quoted correctly. This is the only way of
ensuring that we can answer your query correctly and quickly.
417102276 Rev. 5-02.2020
n Mechanic
n Qualified electrician
n Service personnel
n Specialist
n Protective gloves
n Chemical-resistant protective gloves
n Protective eyewear
n Safety shoes
Ä Chapter 7.4.1 'Symbols in operating mode' on page 70 and
Ä Chapter 14.3 'Pump key 'EcoAdd' ' on page 182) is
Ä Chapter 7.2 'Start screen' on page 64) of the pump.
Ä Chapter 12 'Wearing parts and spare parts' on page 168) should
Ä Chapter 14.2 'Equipment marking / Rating
156