Start-up
Perform calibration
Fig. 82: Software setting: 'Calibration'
[Start calibration] :
1.
[Main menu] Press the
ð The [Main menu] is displayed.
2.
[Select calibration] .
ð The screen for starting [calibration] is displayed.
3.
[Press Start] .
ð The screen changes to 'Calibration step 1' .
Calibration step 1 runs automatically.
The 'Calibration step 1' screen is displayed.
4.
Enter the quantity in litres (before the decimal point) using the scrollbar.
5.
Select the quantity in millilitres after the decimal point.
6.
Enter the quantity in millilitres (after the decimal point) using the scrollbar.
7.
[Click Next]
ð The screen changes to 'Calibration step 2' .
The 'Calibration step 2' runs automatically.
The screen page for calibration step 2 is called up.
8.
Enter the quantity in litres (before the decimal point) using the scrollbar.
9.
Select the quantity in millilitres after the decimal point.
10. Enter the quantity in millilitres (after the decimal point) using the scrollbar.
11. [Click Next]
ð The setting is saved, and the screen switches back to the [operating display] .
417102276 Rev. 5-02.2020
1
button.
.
.
2
4
8
138
3
7
5
6
11
9
10