Disposal; Information On Disposal For Users Of Waste Electrical & Electronic Equipment; Information On Disposal In Countries Outside The European Union; Battery Removal - CareFusion Alaris GP Technical & Service Manual

Disposal

Ensure the pump is disconnected from the AC power supply and switched off before attempting to service .
A
V The pump contains static-sensitive components and therefore strict ESD precautions should be observed at all
times .
Following all spare part replacement and repair activities, testing must be performed in accordance with the
Performance Verification Procedure (PVP), see Chapter 3 'Preventative Maintenance' .
Only use CareFusion recommended spare parts .
Information on Disposal for Users of Waste Electrical & Electronic Equipment
This U symbol on the product and/or accompanying documents means that used electrical and electronic products should not be
mixed with municipal waste.
If you wish to discard electrical and electronic equipment, please contact your CareFusion affiliate office or distributor for further
information.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and
the environment which could otherwise arise from inappropriate waste handling.

Information on Disposal in Countries outside the European Union

This symbol is only valid in the European Union. The product should be disposed of taking environmental factors into consideration.
To ensure no risk or hazard, remove the internal rechargeable battery and the Nickel Metal Hydride battery from the control board and
dispose of as outlined by the local country regulations. All other components can be safely disposed of as per local regulations.

Battery Removal

Removal Procedure
Remove the two case screws with integral flat washer in battery cover, remove cover and battery.
Battery pack
Battery Cover
1000SM00013 Iss. 4
Alaris® GP Volumetric Pump
71/80
Appendix