TANDBERG Codec C Series Api Manual page 79

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
The System Unit commands,
cont...
xCommand SystemUnit MenuPassword Set
Set a menu password to restrict access to Advanced menu settings.
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Set Password:***********
*r MenuPasswordSetResult (status=OK):
** end
xCommand SystemUnit MenuPassword Validate
Validate that the supplied password is correct.
Parameters:
Password(r): <S: 0, 255>
Example:
xCommand SystemUnit MenuPassword Validate Password:***********
*r MenuPasswordValidateResult (status=OK):
** end
xCommand SystemUnit DateTime Set
Set the date and time for the system, if not available from NTP (Network Time Protocol).
Parameters:
Year: <2008..2037>
Month: <1..12>
Day: <1..31>
Hour: <0..23>
Minute: <0..59>
Second: <0..59>
Example:
xCommand SystemUnit DateTime Set Year:2009 Month:7 Day:3 Hour:12 Minute:0
Second:0
*r DateTimeSetResult (status=OK):
** end
D14642.02—MAY 2010
About the API About the API xConfiguration xConfiguration
xCommand
xCommand xCommand xStatus xStatus
The System Unit commands,
cont...
xCommand SystemUnit DateTime Get
Read the time and date from the system.
Parameters:
No paramters.
Example:
xCommand SystemUnit DateTime get
*r DateTimeGetResult (status=OK):
Year: 2009
Month: 7
Day: 3
Hour: 12
Minute: 0
Second: 0
** end
xCommand SystemUnit ConfigurationProfile SaveCurrentConfigurationAs
Save the current system settings into a configuration profile. Assign a name to the new profile. The name is
the unique identifier of the profile.
Parameters:
Name(r): <S: 0, 255>
Example:
xCommand SystemUnit ConfigurationProfile SaveCurrentConfigurationAs Name:
"My _ ConfigurationProfile _ 1"
*r ConfigurationProfileSaveCurrentConfigurationResult (status=OK):
** end
79
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com