TANDBERG Codec C Series Api Manual page 76

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
The Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
PresentationSource: Select the video input source to be used for presentation.
Parameters:
PresentationSource: <1..5>
Example:
xCommand Presentation Start PresentationSource:2
OK
*r PresentationStartResult (status=OK):
** end
xCommand Presentation Stop
Stop the media stream from the presentation source.
Parameters:
No paramters.
Example:
xCommand Presentation Stop
OK
*r PresentationStopResult (status=OK):
** end
D14642.02—MAY 2010
About the API About the API xConfiguration xConfiguration
xCommand
xCommand xCommand xStatus xStatus
The Preset commands
xCommand Preset Store
Store the current camera position. The system may hold 15 predefined camera positions (presets).
PresetId: Select preset 1 to 15.
Type: Select Camera or All.
Description: Enter a description of the preset.
Parameters:
PresetId(r): <1..15>
Type(r): <All/Camera>
Description: <S: 0, 255>
Example:
xCommand Preset Store PresetId:3 Type:Camera Description:"Left view"
OK
*r PresetStoreResult (status=OK):
** end
xCommand Preset Activate
Activate one of the local presets.
Parameters:
PresetId(r): <1..15>
Example:
xCommand Preset Activate PresetId:3
OK
*r PresetActivateResult (status=OK):
** end
xCommand Preset Clear
Delete an existing preset.
Parameters:
PresetId(r): <1..15>
Example:
xCommand Preset Clear PresetId:3
OK
*r PresetClearResult (status=OK):
** end
76
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com