TANDBERG Codec C Series Api Manual page 124

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
The System Unit status,
cont...
xStatus SystemUnit Uptime
Shows the number of seconds since the last restart of the codec.
Value space of the result returned:
<Integer value>
Example:
xStatus SystemUnit Uptime
*s SystemUnit Uptime: 597095
** end
xStatus SystemUnit Software Application
Shows which software application is running on the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Software Application
*s SystemUnit Software Application: "Endpoint"
** end
xStatus SystemUnit Software Version
Shows the software version installed on the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Software Version
*s SystemUnit Software Version: "TC3.1.0"
** end
D14642.02—MAY 2010
About the API About the API xConfiguration xConfiguration
xStatus
xCommand xCommand xStatus xStatus
The System Unit status,
cont...
xStatus SystemUnit Software Name
Shows the name of the software that is installed on the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Software Name
*s SystemUnit Software Name: "s52000"
** end
xStatus SystemUnit Software ReleaseDate
Shows the release date of the software installed on the codec.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus SystemUnit Software ReleaseDate
*s SystemUnit Software ReleaseDate: "2010-04-30"
** end
xStatus SystemUnit Software MaxVideoCalls
Shows the the maximum number of simultaneous video calls that is supported.
Value space of the result returned:
<Integer value>
Example:
xStatus SystemUnit Software MaxVideoCalls
*s SystemUnit Software MaxVideoCalls: 3
** end
124
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com