TANDBERG Codec C Series Api Manual page 50

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
The Video settings,
continued...
xConfiguration Video Layout ScaleToFrameThreshold
Only applicable if the ScaleToFrame configuration is set to manual. If the difference in aspect ratio between
the video input source and the target image frame is less than the ScaleToFrameThreshold configuration
(in percent), the image is stretched to fit. If not, the system will maintain the original aspect ratio.
Value space: <0..100>
Range: Select a value from 0 to 100 percent.
Example: xConfiguration Video Layout ScaleToFrameThreshold: 5
xConfiguration Video Layout Scaling
Define how the system shall adjust the aspect ratio for images or frames when there is a difference
between the image and the frame it is to be placed in.
Value space: <On/Off>
On: Let the system automatically adjust aspect ratio.
Off: No adjustment of the aspect ratio.
Example: xConfiguration Video Layout Scaling: On
xConfiguration Video MainVideoSource
Define which video input source shall be used as the main video source.
Value space: <1..3>
Range: Select the source to be used as the main video source.
Example: xConfiguration Video MainVideoSource: 1
xConfiguration Video Monitors
Set the monitor layout mode.
Value space: <Single/Dual/DualPresentationOnly>
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitr, while the presentation
(if any) will be shown on the second monitor.
Example: xConfiguration Video Monitors: Single
D14642.02—MAY 2010
xConfiguration
About the API About the API xConfiguration xConfiguration xCommand xCommand xStatus xStatus
The Video settings,
continued...
xConfiguration Video OSD InputMethod InputLanguage
The codec can be enabled for Cyrillic input characters in the GUI (Graphical User Interface). NOTE!
Requires that xConfiguration Video OSD inputMethod Cyrillic is set to On.
Value space: <Latin/Cyrillic>
Latin: Latin characters can be entered when using the remote control (default).
Cyrillic characters can be entered using the remote control. NOTE! Requires a TANDBERG Remote
Control TRC5 with Cyrillic fonts.
Example: xConfiguration Video OSD InputMethod InputLanguage: Latin
xConfiguration Video OSD InputMethod Cyrillic
This configuration is used to hide or show the Cyrillic mode as menu input language in the GUI (Graphical
User Interface).
Value space: <On/Off>
On: Cyrillic mode is available as a menu input language in the GUI. This will enable the setting
xConfiguration Video OSD InputMethod InputLanguage.
Off: Cyrillic mode is NOT available as a menu input language in the GUI.
Example: xConfiguration Video OSD InputMethod Cyrillic: Off
xConfiguration Video OSD Mode
The Video OSD (On Screen Display) Mode lets you define if information and icons should be displayed on
screen.
Value space: <On/Off>
On: Show the on screen menus, icons and indicators.
Off: Hide the on screen menus, icons and indicators.
Example: xConfiguration Video OSD Mode: On
50
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com