TANDBERG Codec C Series Api Manual page 13

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
Value types and formats
The system supports the following value types:
• Integer values
• Literal values
• String values
• E164 string values (strings only containing digits, '#' and '*')
• IPv4 Address values
• *IPv6 Address values
• IPv4 or *IPv6 Address values
* Not supported in this version
D14642.02—MAY 2010
About the API
About the API About the API xConfiguration xConfiguration
Formats for values types
Integer values:<x..y>
Defines the valid range for an integer input. x = min value, y = max value.
<1..100>
Literal values: <X/Y/../Z>
Defines the possible values for a given configuration.
<On/Off/Auto>
String values: <S: x, y>
Defines that the valid input for this configuration is a String with minimum length x and maximum length of y characters.
<S: 0, 49>
IPv4 Address values: <IPAddr>
Defines that the input must be an IPv4 address.
<IPAddr>
*IPv6 Address values: <IPv6Addr: x, y>
Defines that the input must be an IPv6 address with minimum length x and maximum length y.
<IPv6Addr: 0, 43>
IPv4 or *IPv6 Address values: <IPv4v6Addr: x, y>
Defines that the input must be an IPv4 or IPv6 address with minimum length x and maximum length y.
<IPv4v6Addr: 0, 43>
xCommand xCommand xStatus xStatus
13
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com