TANDBERG Codec C Series Api Manual page 21

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
Query status information
Status type commands returns information about the system and
system processes. You can query all information or just some of it.
To address status information enter the xStatus command
followed by an address expression (XPath or TANDBERG
SimplePath).
You can set up the xStatus read command to address all
information or just some of it, see the examples to the right for
illustrations.
D14642.02—MAY 2010
About the API
About the API About the API xConfiguration xConfiguration
Address status information with xStatus
To read status from the system just type the root command (xStatus) followed by the path (address expression):
xStatus <address expression>
Example 1: Query all ongoing Call information:
xstatus call
*s Call 3 Status: Connected
*s Call 3 Direction: Outgoing
*s Call 3 Protocol: "h323"
*s Call 3 RemoteNumber: "firstname.lastname@company.com"
*s Call 3 CallbackNumber: "h323:firstname.lastname@company.com"
*s Call 3 DisplayName: "firstname.lastname@company.com"
*s Call 3 TransmitCallRate: 768
*s Call 3 ReceiveCallRate: 768
*s Call 3 Encryption Type: "None"
*s Call 3 PlacedOnHold: False
*s Call 3 Duration: 9
** end
OK
Example 2: Query the protocol for a call:
xstatus call protocol
*s Call 3 Protocol: "h323"
OK
xCommand xCommand xStatus xStatus
21
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com