TANDBERG Codec C Series Api Manual page 5

TANDBERG Codec C60 and Codec C40
Introduction
Contents Contents Introduction Introduction
Introduction
You may already be familiar with the system integrator
guides for the Codec C Series. To help you find the
information you need, TANDBERG has split the guide into
two smaller and more accessible parts listed on the right
of this page.
D14642.02—MAY 2010
About the API About the API xConfiguration xConfiguration
The purpose of this document
The purpose of this document is to introduce you to the
TANDBERG Application Programmer Interface (API) in
general and to serve as a reference guide for the API
commands.
Disclaimers and Notices
The objective of this documentation is to provide the
reader with assistance in using and configuring the
product. The capabilities of TANDBERG products and
other manufacturers' products change over time and
so the required configuration may be different from
that indicated here. If you have any suggestions for
changes to this document, please feed them back
to TANDBERG through your TANDBERG Authorized
Service Representative.
If you need technical support, please contact your
TANDBERG Authorized Service Representative.
The specifications for the product and the information
in this Guide are subject to change at any time, without
notice, by TANDBERG. Every effort has been made to
supply complete and accurate information in this Guide;
however, TANDBERG assumes no responsibility or
liability for any errors or inaccuracies that may appear in
this document.
TANDBERG® is a registered trademark belonging to
Tandberg ASA. Other trademarks used in this document
are the property of their respective holders.
This Guide may be reproduced in its entirety, including
all copyright and intellectual property notices, in limited
quantities in connection with the use of this product.
Except for the limited exception set forth in the previous
sentence, no part of this Guide may be reproduced,
stored in a retrieval system, or transmitted, in any
form, or by any means, electronically, mechanically, by
photocopying, or otherwise, without the prior written
permission of TANDBERG.
www.tandberg.com
© 2010 TANDBERG
xCommand xCommand xStatus xStatus
Products covered in this guide
• TANDBERG Codec C60
• TANDBERG Codec C40
Other documents you might find useful
• Video conference room primer guide
• Getting started guide for Profile Series, Codec C Series, Quick Set C20
• User Guide for Profile Series, Codec C Series and Quick Set C20
• Administrator guide for Profiles using Codec C20 and Quick Set C20
• Administrator guide for Profiles using Codec C60 and Codec C60/C40
• Administrator guide for Profiles using Codec C90 and Codec C90
• Camera user guide for PrecisionHD 1080p/720p
• API guides for Codec C90, C60, C40
• Physical interfaces guides for Codec C90, C60, C40
• CAD Drawings
• Legal and safety information for Profile Series, Codec C Series and
Quick Set C20
Download the user documentation
Go to: http://www.tandberg.com/docs
5
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com