TANDBERG Codec C Series Api Manual page 74

TANDBERG Codec C60 and Codec C40
Contents Contents Introduction Introduction
The Phonebook commands,
cont...
xCommand Phonebook Contact Modify
Modify the contact details of an existing contact in the local phonebook.
ContactId: A unique identifier for the contact, which was created when the xCommand Phonebook
Contact Add command was issued.
Name: The name of the contact.
FolderId: A unique identifier for the folder, which was created when the xCommand Phonebook Folder
Add command was issued.
ImageURL: The URL to an image.
Title: The title of the contact.
Parameters:
ContactId(r): <S: 0, 255>
Name: <S: 0, 255>
FolderId: <S: 0, 255>
ImageURL: <S: 0, 255>
Title: <S: 0, 255>
Example:
xCommand Phonebook Contact Modify ContactId:localContactId-1 Name:"John Doe
- office"
OK
*r PhonebookContactModifyResult (status=OK):
** end
xCommand Phonebook Contact Delete
Delete an existing contact from local phonebook.
ContactId: A unique identifier for the contact, which was created when the xCommand Phonebook
Contact Add command was issued.
Parameters:
ContactId(r): <S: 0, 255>
Example:
xCommand Phonebook Contact Delete ContactId:localContactId-1
OK
*r PhonebookContactDeleteResult (status=OK):
** end
D14642.02—MAY 2010
About the API About the API xConfiguration xConfiguration
xCommand
xCommand xCommand xStatus xStatus
The Phonebook commands,
cont...
xCommand Phonebook ContactMethod Add
Add details about the call setup to an existing contact in the local phonebook. Returns the
ContactMethodId (Name: 1), which is a unique Id of the contact method.
ContactId: A unique identifier for the contact, which was created when the xCommand Phonebook
Contact Add command was issued.
Device: Set which type of device to call to.
Number(r): The phone number or address of the contact.
Protocol: Select H323 or SIP protocol.
CallRate: Set a call rate.
Parameters:
ContactId(r): <S: 0, 255>
Device: <Mobile/Other/Telephone/Video>
Number(r): <S: 0, 255>
Protocol: <H323/SIP>
CallRate: <0..65534>
Example:
xCommand Phonebook ContactMethod Add ContactId:localContactId-2 Number:54321
Protocol:H323
OK
*r PhonebookContactMethodAddResult (status=OK):
Name: 1
** end
xCommand Phonebook ContactMethod Delete
Delete details about the call setup to an existing contact in the local phonebook.
ContactId: A unique identifier for the contact, which was created when the xCommand Phonebook
Contact Add command was issued.
ContactMethodId: A unique identifier for the contact method, which was created when the xCommand
Phonebook ContactMethod Add command was issued.
Parameters:
ContactId(r): <S: 0, 255>
ContactMethodId(r): <S: 0, 255>
Example:
xCommand Phonebook ContactMethod Delete ContactId:localContactId-2
ContactMethodId:1
OK
*r PhonebookContactMethodDeleteResult (status=OK):
** end
74
API Guide
Appendices Appendices Contact us Contact us
www.tandberg.com