TANDBERG Codec C60 and Codec C40
Contents
Contents
Introduction
Introduction
The Video Input status,
cont...
xStatus Video Input Source [1..3] Resolution Width
Shows the resolution width (in pixels) for the video input source.
Value space of the result returned:
<0..4000>
Example:
xStatus Video Input Source 1 Resolution Width
*s Video Input Source 1 Resolution Width: 1920
** end
xStatus Video Input Source [1..3] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
<0..300>
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
xStatus Video Input HDMI [1..2] Connected
Shows if there is something connected to the HDMI connector. Not all connections can be detected.
Value space of the result returned:
<True/False>
Example:
xStatus Video Input HDMI 1 Connected
*s Video Input HDMI 1 Connected: True
** end
D14642.02—MAY 2010
About the API
About the API
xConfiguration
xConfiguration
xStatus
xCommand
xCommand
xStatus
xStatus
The Video Input status,
cont...
xStatus Video Input HDMI [1..2] SignalState
Shows the signal state for the HDMI input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space:
<Unknown/OK/Unsupported>
Example:
xStatus Video Input HDMI 1 SignalState
*s Video Input HDMI 1 SignalState: OK
** end
xStatus Video Input DVI [2..3] Connected
Shows if there is something connected to the DVI connector. Not all connections can be detected.
Value space of the result returned:
<True/False>
Example:
xStatus Video Input DVI 2 Connected
*s Video Input DVI 2 Connected: False
** end
xStatus Video Input DVI [2, 3] SignalState
Shows the signal state for the DVI-I input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space:
<Unknown/OK/Unsupported>
Example:
xStatus Video Input DVI 2 SignalState
*s Video Input DVI 2 SignalState: OK
** end
129
API Guide
Appendices
Appendices
Contact us
Contact us
www.tandberg.com
Need help?
Do you have a question about the Codec C Series and is the answer not in the manual?