Searching For A Port Or Service - JRC JMR-5410-4X Instruction Manual

9.2.3 Searching for a port or service

This function searches for a port or service around the specified coordinates.
When [Search Port or Service] is selected from the context menu that is displayed when you right-click
on the screen, the "Search Port or Service" screen is opened and a search starts.
The following items are displayed on the search screen.
Item Contents
Search Position Displays the specified coordinates under which a port or
a service is searched for. The coordinates when the
context menu was opened by right-clicking are
displayed.
Port or Service Select a target to be searched for.
[Search Service Clicking on this button opens the "Search Service
Setting] button Setting" screen. To search for a service, check the
check box for the service to be searched for on this
screen. A service can be selected from the Port and
Service combo box.
[ ] input box A port or a service is searched for based on the
contents that are input.
Search Range Specify a search range based on the specified
coordinates.
Level Specify a level of the port or the service to be searched
for.
A level is assigned to a port or service and the port or
the service is displayed or hidden according to the
display scale. When the [Current Level] check box is
checked, this item cannot be specified.
Current Level Sets the level of the port or the service to be searched
for to the level according to the current display scale.
[Search] button When this button is clicked on, search for a port or a
service starts. At completion of the search, the result is
displayed in the search result list.
9-5
Setting value
-
Port (always
displayed)
Item that is selected
on the "Search
Service Setting"
screen.
-
Up to 32 characters
No input is
acceptable.
0.1 to 99.9 NM
W (Wide)
Z
A
B
C
D
E
F
G (Detail)
Enable: Checked
Disable: Unchecked
-
Section 9 Chart
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録