JRC JMR-5410-4X Instruction Manual page 32

Pulse compression
Radar beacon
Range
Range side lobe
Reference target
Rubber band
Scale
Sea state
Sleeping AIS target
Spot depth
SSR: Solid State Radar
*1 © C-MAP 2017, All rights reserved.
: Correlation processing performed when a transmitted chirp signal is
received by a solid-state radar after reflecting off the target. This
processing gain enables the radar to have necessary detection
capability even when a transmission power is low.
: A navigation aid which responds to the radar transmission and
generates radio wave
: An area of the chart displayed on the screen. Represented by one half
of the length of the chart display screen.
: False image that is generated as a result of pulse compression
processing in the solid-state radar when there is a large target such as
a large ship in the vicinity.
: A fixed target specified to calculate the speed over the ground
: Border that indicates the selected range.
: The display scale
: The average height of the wave expressed by dividing into several
classes.
: A target indicating the presence and orientation of a vessel equipped
with AIS
: Numeric representation of depth
: Radar that uses semiconductor elements instead of magnetron, which
requires periodic replacement. It is built with a system that ensures
necessary detection capability even when a transmission output is low,
by using chirp signals with a long pulse length upon transmission and
performing pulse compression upon reception
xxx