JRC JMR-5410-4X Instruction Manual page 379

Page 5
Setting Item
Gain Offset
PRF
Fishnet Detection
Antenna Height
Page 6
Setting Item
Save as User Settings
Load User Settings
Initialise
Description of Setting
Set up the gain offset for sensitivity compensation.
Set up the operation mode of the transmitter's
repetition transmission frequency.
[Economy] cannot be selected when a solid state
radar antenna is connected. If a solid state radar
antenna is connected while [Economy] is being
selected, the setting will be reset to the default
(factory preset) value.
Turn On/Off the fishnet detection mode.
Set up the radar antenna height.
When this is set to [Default], the value that has
been set in [Antenna Height] by selecting [Service]
- [Adjustment] - [TXRX] is used.
Description of Setting
Data that can be called is saved as the user
default values of the selected observation scene.
Load the user default values to the data that can
be called.
Load the data that is set at the factory shipment to
the data that can be loaded.
13-7
Setting Value
-32 to 32
Normal / Economy /
High Power
To enable: Select.
To disable: Clear.
Default / -5 m /
5-10 m / 10-20 m /
20 m-
Setting Value
-
-
-
Section 13 Setting up the Operation Mode
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B