JRC JMR-5410-4X Instruction Manual page 358

Setting Item
Page2
Highlight Contour Set a specified contour (contour to be highlighted). Up
to seven contours can be registered.
Contour Specify a water depth of the contour. When a numeric
value is entered and the [▼] button is pressed, water
depth values that can be set are retrieved and
displayed. A contour can be input by selecting a
contour on the screen.
Add When this button is clicked on, the water depth value
that was specified in the text box is registered in the
water depth list.
Delete Delete the column that is selected by selecting the
check box in the water depth list.
Contour list Display the contours of the water depths that are
registered in the list. A colour and a line type can be
specified for each contour that is displayed. When Off
is specified for a colour, the contour will be hidden.
Display Priority Set up a drawing order of the contour.
Contour : Draw the contour over the echo.
Echo
Section 11 Setting up Screen View
Description of Setting
: Draw the contour under the echo.
11-14
Setting Value
-
0 to 9999m
-
-
[Colour]
White / Grey / Amber /
Magenta / Blue /
Cyan / Green / Yellow /
Orange / Dark Red /
Off
[Line Type]
Solid line / dotted line /
dashed line /
chain line /
two-dot chain line
chain line2
two-dot chain line2
Contour
Echo