Observation Scene Common Settings - JRC JMR-5410-4X Instruction Manual

13.4 Observation Scene Common
Settings
Set observation scenes to be assigned to any of the short range, middle range, and long range.
[Operation procedure]
Open the observation scene common setting screen by performing the following menu operations.
[Menu] button → Settings → Obs. Scene Common
Setting Item
Short (Short range)
MID (Middle range)
Long (Long range)
Obs. Scene - Short
Obs. Scene - MID
Obs. Scene - Long
Show Obs. Scene
Section 13 Setting up the Operation Mode
Description of Setting
Select a range of observation scene "AUTO(S)".
A range shorter than MID (middle range) and
Long (long range) can be set.
Select a range of observation scene "AUTO(M)".
A range longer than Short (short range) and
shorter than Long (long range) can be set.
Display the range of observation scene
"AUTO(L)". The value that was set in the middle
range is displayed.
Select an observation scene to be set in
observation scene "AUTO(S)".
Select an observation scene to be set in
observation scene "AUTO(M)".
Select an observation scene to be set in
observation scene "AUTO(L)".
Select an observation scene to display on the
screen.
Checking the checkbox of the Obs. Scene to be
used.
[Standard] is constantly set to On and cannot
change.
[AUTO] is set to Off, setting of [AUTO change
Obs. Scene] is disabled.
13-8
Setting Value
NM/sm:
0.125 to 48.000
Km:
0.15 to 64.000
*The maximum value
is less than the range
that is set in MID.
NM/sm:
0.25 to 96.000
Km:
0.3 to 128.000
*The minimum value is
greater than the range
that is set in Short.
-
Standard / Coast /
Open-Sea / Fishnet /
Storm / Calm / Rain /
Bird / Long / Buoy /
User1 / User2
Same as above
Same as above