Confirming Operating Time - JRC JMR-5410-4X Instruction Manual

15.1.4

Confirming operating time

Confirm the operating time of this system.
[Operation procedure]
Open the equipment operating time confirmation screen by performing the following menu operations.
[Menu] button → Maintenance → Operating Time
The following table show the contents displayed.
Item
Operating Time of Display Unit
Total
LCD FAN
RPU FAN
Operating Time of Scanner Unit
Total
Transmit
Motor
FAN
PS FAN
TX FAN
Memo
[Operating Time of Scanner Unit] is displayed only when the radar antenna is connecetd in
RADAR mode.
Section 15 Maintenance & Inspection
Total operating time of this equipment
Total LCD fan operating time. The estimated replacement time is indicated
in ( ).
Total RPU fan operating time. The estimated replacement time is indicated
in ( ).
Total operating time of the radar antenna
Total operating time of the transmitter. The estimated replacement time is
indicated in ( ).
Total operating time of the motor. The estimated replacement time is
indicated in ( ).
Total operating time of the radar antenna fan. The estimated replacement
time is indicated in (
This item is displayed only when the current radar antenna (magnetron/small
solid state) is connected.
Total operating time of the power supply unit fan. The estimated replacement
time is indicated in (
This item is displayed only when a new type of radar antenna
(NKE-2255-7/9/6HS) is connected.
Total operating time of the fan of the transmission unit. The estimated
replacement time is indicated in (
This item is displayed only when a new type of radar antenna
(NKE-2255-7/9/6HS) is connected.
Displayed information
).
).
).
15-4