Inter Switch Operations; Flow Of Operations; Opening The [Inter Switch] Dialogue Box - JRC JMR-5410-4X Instruction Manual

C.2

Inter switch Operations

When changing the connection pattern, carry out the operations according to the following flow.
C.2.1

Flow of operations

C.2.2

Opening the [Inter Switch] dialogue box

Memo
The [Inter Switch] dialogue can be displayed in the Transmission Not Ready state or preheat state.
When transmission is not ready, "Preheat" or "Standby (disable)" is displayed on the
Standby/Transmission change button.
1
In the transmission state, click on the Standby/Transmission change button.
"Standby" is displayed on the button and the equipment is set to Transmission Not Ready state.
If the equipment is already in the Transmission Not Ready state, this operation is not required.
2
Click the Change Inter switch connection button.
The [Inter Switch] dialogue box is displayed.
The connection state between the current radar antenna and the display unit obtained by
communication with the Inter switch is displayed in the [Inter Switch] dialogue box.
Put in the transmission standby state.
Open the [Inter Switch] dialogue box.
Select the connection pattern.
Close the [Inter Switch] dialogue box.
C-3 Appendix C Setting the Inter switch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
APP C