Setting A Chart - JRC JMR-5410-4X Instruction Manual

[Clear] tab
On the [Clear] tab, clear the other ship's track.
Setting Item
Track Colour
Track Number
File Load/Save
11.1.8

Setting a chart

When you select [Chart View] in the classification pane, the [Chart View] dialogue is displayed in the
edit pane.
[Operation procedure]
Open the chart selection screen by performing the following menu operations.
[Menu] button → View → Chart View
The following table shows the descriptions of the settings.
Setting Item
Chart Type
Display Fishing
Area
Special Line Type
Description of Setting
By specifying a colour, clear the track.
When the [Clear] button is pressed after
selecting a colour, a confirmation message
dialogue is displayed for clearing the track. To
execute Clear, press the [OK] button.
By specifying a number of other ship's track,
clear the track.
When other ship's track is selected and the
[Clear] button is pressed, a confirmation
message is displayed for clearing the track.
To execute Clear, press the [OK] button.
Display the dialogue by selecting [Tools] –
[File manager] – [File Load/Save].
Description of Setting
Select a type of the chart to be displayed by
clicking on the button.
Displayed only when newpec is installed.
C-MAP MAX: Displays the C-MAX chart.
newpec: Displays the newpec chart.
Displays/hides the fishing area.
Set up the line type of special line.
Off : Hides special lines.
Other than Off : Displays special lines in
selected type.
11-9
Setting Value
White / Grey / Amber /
Magenta / Blue / Cyan /
Green / Yellow / Orange /
Dark Red
Track1 / Track 2 / ... /
Track10 / Track 11 to 20 /
Track21 to 30 / ... /
Track91 to 100
-
Setting Value
C-MAP MAX
newpec
Shown: Selected
Hidden: Clear
Off / Dotted line / Solid line /
Dashed line
Section 11 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録