Setting Up The Display Of C-Map Max - JRC JMR-5410-4X Instruction Manual

11.1.9

Setting up the display of C-MAP MAX

Set drawing of C-MAP MAX.
This setting is allowed only when [C-MAP MAX] is selected in [Chart View].
[Operation procedure]
Open the C-MAP MAX drawing setting screen by performing the following menu operations.
[Menu] button → View → C-MAP MAX
The following table shows the descriptions of the settings.
Setting Item
Page1
Mode Select a water depth shadow mode.
The details of a water depth shadow mode are
provided in a separate table below.
Highlight Depth Set a water depth area fill.
Area On: Fill
Off: No fill (white)
Minimum Depth Set a minimum value of the water depth shadow fill
range.
This item can be set only when [Dynamic] mode or
[Dynamic Inverted] mode is selected for the water
depth shadow mode.
Maximum Depth Set a maximum value of the water depth shadow fill
range.
This item can be set only when [Dynamic] mode or
[Dynamic Inverted] mode is selected for the water
depth shadow mode.
Safety Contour Set a safety contour.
This item can be set only when [Safe] mode is
selected as the water depth shadow mode.
Page2
Point of Interested Display/hide the facility information object.
Land Elevation Display/hide the land elevation object.
Roads Display/hide the road object.
Land Elevation Display/hide the land evaluation value.
Value
Land Marks Display/hide the land mark object.
River & Lake Display/hide the river and lake object.
Section 11 Setting up Screen View
Description of Setting
11-10
Setting Value
Off / Normal / Safe /
Dynamic /
Dynamic Inverted
On: Selected
Off: Clear
0m to Maximum Depth
Minimum Depth to
9999 m
0m to 9999 m
Shown: Selected
Hidden: Clear
Shown: Selected
Hidden: Clear
Shown: Selected
Hidden: Clear
Shown: Selected
Hidden: Clear
Shown: Selected
Hidden: Clear
Shown: Selected
Hidden: Clear