JRC JMR-5410-4X Instruction Manual page 144

Setting item
Rotation
Length of One Side
Simulate Closing
Distance
Section 3 Common Basic Operations
Contents
In rectangle cursor edit mode, rotate the rectangle
cursor by using the [MULTI] dial.
Turn clockwise: +, Turn anti-clockwise: -
It is possible to set from the numeric value input
keyboard by selecting an input box.
Displays the length of one side of the rectangle
cursor.
Set whether to close the rectangle automatically.
On: The rectangle cursor moves following the
movement of own ship. The rectangle cursor
rotates following the rotation of own ship.
Off: The rectangle cursor does not follow the
movement of own ship.
Set how many NM (sm/km) own ship should travel
in order to close the rectangle cursor.
3-26
Setting value
0.0 to 359.9°
Maximum value
• NM: 7.071 NM
• km: 13.096 km
• sm: 8.139 sm
Enable: Checked
Disable:
Unchecked
0.001 to 1.000 NM