Presetting Each Observation Scene - JRC JMR-5410-4X Instruction Manual

13.3 Presetting Each Observation Scene

Adjust the preset of the observation scene according to the oceanographic condition,
with the thorough understanding of the features of the radar signal processing
setting. The optimum radar performance may not be able to be demonstrated due to
the contents of the changed setting or the oceanographic condition at that time.
There are 12 types of observation scenes; you can preset each observation scene.
The items that can be preset are displayed in the editing pane by being divided into six setup
dialogues.
[Operation procedure]
Open the observation scene preset screen by performing the following menu operations.
[Menu] button → Settings → Obs. Scene Preset
The following table shows the items that are displayed for each dialogue.
Memo
Some items may not be displayed depending on the installation setting.
Common
Setting Item
Obs. Scene
Page 1
Setting Item
IR
(Interference
Rejection)
Target Enhance
Echo Process
Sea
(sea clutter
adjustment)
Description of Setting
Set up the observation scene.
Description of Setting
Set up the IR (Interference Rejection) function.
Set up the Target Enhance function.
Set up the Echo Process function.
If the ship's heading cannot be acquired, [PROC
Off] is set.
You can switch between MAN and AUTO.
MAN: Manually removes sea clutters.
AUTO: Automatically removes sea clutters.
13-3 Section 13 Setting up the Operation Mode
Setting Value
Standard / Coast /
Open-Sea / Fishnet /
Storm / Calm / Rain /
Bird / Long / Buoy /
User1 / User2
Setting Value
IR Off / IR Low /
IR Middle / IR High
ENH Off / ENH Level1 /
ENH Level2 /
ENH Level3
PROC Off
3Scan CORREL
4Scan CORREL
5Scan CORREL
Remain
Peak Hold
MAN / AUTO
１
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B