Motor Replacement Procedure For Nke-2632/Nke-2632H - JRC JMR-5410-4X Instruction Manual

15.5.3.5 Motor replacement procedure for NKE-2632/NKE-2632H

1
Remove the cover.
M8 bolt fall-out
prevention
Both left and right side covers need
(6 positions)
to be removed to carry out the
motor replacement work.
Remove the M8 fall-out prevention
bolts (6 positions) and remove the
cover.
15-39 Section 15
When replacing a motor,
ensure that the safety switch
of the radar antenna is
turned Off prior to
commencing the
replacement work.
Exercise care not to lose
bolts, screws and other parts
removed from the radar
antenna, as they will be
used again in later steps.
Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
23
24
24
26
27