Setting Up The Display Of The Past Position; Setting Up The Display Of User Map - JRC JMR-5410-4X Instruction Manual

11.1.3

Setting up the display of the past position

Set the display of the past position.
[Operation procedure]
Open the past position display setting screen by performing the following operations.
[Menu] button → View → Past Position
Setting Item
Past Position
11.1.4

Setting up the display of user map

Set up the display of User Map.
[Operation procedure]
[Menu] button → View → User Map
The descriptions of settings are shown in the table below.
Setting Item
Object Type
Mark/Line Colour
Mark Size
Comment Font Size Set the font size of the comment.
Description of Setting
Select an interval of the past position.
When Off is selected, the past position is not
displayed.
Description of Setting
Click on the button to specify whether to
display or hide the object mark, and select the
mark to be displayed.
All On: Displays all marks.
Individual: Displays selected marks.
Display/Hide the colour for Mark/Line. Select
the colour to be set.
Set the mark display size.
11-5
Setting Value
Off / 0.5 min / 1 min / 2 min /
4 min / 0.1 NM / 0.2 NM /
0.5 NM / 1 NM
Setting Value
All On / Individual
Types of selectable marks
Mark: Refer to Appendix
D.5 "Icon Button List for
User Map".
Line: Solid Line, Dotted
Line, Dashed Line
Text: Text
Display: Select
Hide: Clear
White / Grey / Amber /
Magenta / Blue / Cyan /
Green / Yellow / Orange /
Dark Red
1 (Minimum) /2/3/4/5
(Maximum)
Standard / Small
Section 11 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録