Setting Up After Replacements; To Display The Service Menu For Engineers - JRC JMR-92 Series Field Service Manual

4.4

Setting up after replacements

Whenever you have done the replacement of the components in Scanner Unit or in Display Unit,
set up the system as follows.
4.4.1.

To display the Service menu for Engineers:

Service menu for Engineers appears when you enter the password 0009 on Code Input
dialog. For futher information, see "Chapter 7 Troubleshooting".
Enter 0009 in Password.
The [Service] button is added to the menu.
Chapter 4 Replacement procedure
0009
4-514