Basic Operations When Using A Trackball; Basic Trackball Operations; Basic Operations Of Clicking, Right-Clicking And Double-Clicking - JRC JMR-5410-4X Instruction Manual

3.3 Basic Operations When Using a
Trackball
A trackball in the operation unit is mainly used for the operations of this equipment.
This section describes the basic operations performed using the trackball.
3.3.1

Basic trackball operations

As the basic trackball operations, move the cursor that is displayed on the screen and perform various
operations using the left and right mouse buttons.
3.3.2 Basic operations of clicking, right-clicking
and double-clicking
The basic operations of clicking, right-clicking, and double-clicking are as follows.
Clicking Button
Single object
Multiple objects
Right-clicking Single object
Multiple objects
Double-clicking When the mouse button is double-clicked in line creation mode or at creation of a
graphical route, the creation mode terminates.
Section 3 Common Basic Operations
The function of the selected button is executed.
• In the case of the function On/Off button, the function is set
to On/Off whenever the button is clicked on.
• When a function selection type button is clicked on, a
function selection menu is displayed.
The primary action (priority operation) for the target object is
executed. For instance, when the cursor is set to the
deactivated AIS target and the mouse button is clicked on,
"Activate", which is the primary action of the deactivated AIS
target, is executed.
A list menu of the target objects is displayed.
When an object is selected from the menu, the AUTO mode
operation of the selected object is executed.
A context menu of the target object is displayed.
A list menu of the target objects is displayed.
When an object is selected from the menu, the context menu
of the selected object is displayed.
3-2