Displaying Ais Information - JRC JMR-5410-4X Instruction Manual

6.6.4 Displaying AIS information

1
Set the cursor mode to the AUTO mode.
2
Place the cursor on the AIS target to display the activated AIS target information and
then click on.
The information of the selected AIS target is displayed.
Memo
When the numeric data of a target is displayed but the mark "
the target is outside the display.
Canceling AIS target information display
1
Set the cursor mode to the AUTO mode.
2
Move the cursor to and click on the activated AIS target whose AIS target information
is to be cancelled.
The information display of the selected AIS target is cancelled.
Details on AIS target information
Two AIS target information display modes are available, a standard mode, and an extended mode, and
the items that are displayed vary depending on the mode.
Use the AIS Standard/Extended selector button for switching between the standard mode and the
extended mode.
By setting the display to
mode can be set. By setting the display to
be set.
The display contents vary depending on the types of AIS targets.
For verifying more detailed information of the AIS target, refer to "2.3.1.4 AIS Detail INFO".
[Normal AIS target]
Item
AIS ID ID No. of AIS target
Name Ship name of AIS target
Call Sign Call sign of AIS target
MMSI Maritime Mobile Service Identity
COG or CTW COG: Course Over the Ground
CTW: Course Through Water
* In ground mode, COG is displayed. In water mode, CTW is displayed.
SOG or STW SOG: Speed Over the Ground
STW: Speed Through Water
*If the SOG or STW column is Over, the speed of other system is 102.2 kn or
more.
* In extended mode, the display area for two simple modes is used.
CPA Closest approach distance
TCPA Time up to closest approach distance
by clicking on the AIS Standard/Extended selector button, an extended
by clicking on the button again, a standard mode can
6-33
" is not on the radar display,
Explanation
Section 6 Target Tracking and AIS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27