Check Init Parameters Of The Sdc Function Block; Assign The Example Program To Cyclic #1 - LinMot C1250-IP Series Application Note

PLC Commissioning

12.8.4 Check Init Parameters of the SDC function block

Open Main_Linear.st and check if the axis, SDCHW and log names as well as the other parameters in stConfig
are set correctly.

12.8.5 Assign the example program to Cyclic #1

In the Physical View Right-click X20CP1584 > Software and assign the example program to Cyclic #1
NTI AG / LinMot Page 167 of 205