Add A B&R Drive To Generate All Nc Object Specific Requirements Automatically - LinMot C1250-IP Series Application Note

12.6.5 Add a B&R drive to generate all NC object specific requirements automatically
In the B&R Help Explorer check chapter ACP10SDC > Using the Drive Configuration wizard.
It explains how to add the required components.
As alternative it is also possible to do all steps manually as described in the B&R Help Explorer.
1. Search for 8V1010.001-2 in the Hardware Catalog and then double-click (or drag&drop on the Powerlink
interface)
2. Click through the Drive Configuration Wizard without changing anything until Global Settings. Then select the
language, set a name for the axis (gAxis01 in this example) and click Finish at the end.
Now all required libraries for NC objects are added to the project. Also, the NC manager configuration and
the NC mapping are created.
Page 158 of 205
PLC Commissioning
NTI AG / LinMot